The surface problem: tools and scraps competing for space
When you're searing a steak or working through a stir fry, the last thing you want is a spatula lying across the cooking surface or a pile of food bits crowding the edges. Two separate issues tend to show up at once: tools that need somewhere to rest, and larger scraps that can slide toward the rear grease trap.
The Grease Gate and Tool Hooks combo addresses both. It's a single accessory set that gives your spatulas, griddle scoops, and tongs a home on the side shelf while adding a gate over the rear grease trap to catch larger food bits before they fall through.
What the combo actually includes
- Grease Gate and Tool Hooks: Side shelf rail tool hooks that hold spatulas, griddle scoops, and tongs within arm's reach. Keeps frequently used tools off the cooking surface and close to where you're working.

Grease Gate and Tool Hooks - Grease Gate and Tool Hooks: A grease gate that slides over the rear grease trap to prevent larger bits of food from falling through. Addresses the scrap side of grease management without changing how the trap itself works.
How the tool hooks change your cooking rhythm
The hooks mount on the side shelf rail, so your tools stay at the edge of the cooking area rather than on it. That means fewer reaches across hot metal and less juggling when you need to flip, scoop, or plate. The catalog describes the hooks as holding spatulas, griddle scoops, and tongs—the three tools most griddle cooks keep in rotation.
Because the hooks are part of a side shelf rail system, placement depends on your griddle's side shelf. The supplied information doesn't specify rail dimensions or which griddle models the hooks fit, so check your griddle's side shelf rail against the product before ordering.
Where the grease gate fits into grease management
The grease gate is a simple barrier: it slides over the rear grease trap and stops larger food bits from dropping in. It doesn't replace the grease trap or change how you empty it—it just reduces the chance that a chunk of food ends up where it shouldn't.
Think of it as a pre-filter for the trap. Smaller grease and liquid still pass through as designed; the gate is aimed at the larger scraps that can clog or complicate the drain path. The supplied information doesn't include cleaning instructions for the gate, so follow the care guidance that comes with your griddle and the accessory packaging.
A practical setup sequence
- Mount the hooks on the side shelf rail: Position them where your dominant hand naturally reaches—usually the side closest to your prep space. The catalog doesn't specify mounting hardware or steps, so use the included instructions.
- Slide the grease gate over the rear grease trap: Seat it so it sits flush over the trap opening. The gate is designed to slide on, not to be forced.
- Load the hooks with the tools you actually use: Spatulas, scoops, and tongs are the tools named in the product description. Keeping only those on the rail avoids overcrowding.
- Check the gate after each cook: Larger bits will collect at the gate rather than falling through. Clear them as part of your normal cleanup so the gate keeps doing its job.
What this combo does not solve
The grease gate and tool hooks are a surface-management accessory, not a complete grease system. They don't replace a grease cup or liner, and they don't address grease that has already passed the trap. If your main concern is what happens after grease leaves the griddle, a dedicated grease cup setup is the more relevant piece.
The supplied information also doesn't confirm compatibility with every Blackstone griddle model, load limits for the hooks, or specific care instructions for the gate. Treat those as questions to resolve with your griddle's manual or the product packaging rather than assumptions.
Who gets the most from this set
If you cook on a griddle with a side shelf rail and you're tired of hunting for a spatula while something sears, the hooks alone earn their place. If you've also dealt with food bits slipping into the rear grease trap, the gate adds a second layer of convenience. At a catalog price of USD 10.36, it's a low-cost way to tidy two small but recurring annoyances.
If your griddle lacks a side shelf rail, the tool hook half of the combo won't have a mounting point, and the gate's fit depends on your rear trap design. In that case, check the product details against your specific griddle before buying.

