When a griddle knob needs replacing
A griddle control knob that feels loose, won't turn smoothly, or has cracked can make cooking frustrating. Before you assume the worst, check whether the knob is simply loose on the valve stem. If tightening doesn't help, or the knob is damaged, replacement is straightforward. The Chrome/Black Burner Knob is designed to fit on any of our product's valve stems, with two exceptions noted below.
Compatibility check before you buy
- Chrome/Black Burner Knob: It will fit on any of our product’s valve stems, excluding E-Series and 28"/17" Air Fryer control knob. This tells you whether the Chrome/Black Burner Knob is the right replacement for your griddle model. If you own an E-Series or an air fryer model with a 28" or 17" control knob, this knob is not compatible.

Chrome/Black Burner Knob
How to remove a loose or stuck griddle knob
These steps assume your knob is held by a screw or friction fit. The supplied information does not specify the exact attachment method for every griddle, so inspect your knob first.
- Turn off the gas and let the griddle cool: Safety first: shut off the gas supply and allow the griddle to cool completely before touching the knob.
- Inspect the knob for a screw: Look for a small screw on the side or front of the knob. If present, use a screwdriver to loosen it. If there is no screw, the knob likely pulls straight off.
- Pull the knob straight out: Grip the knob firmly and pull it toward you. If it resists, wiggle gently while pulling. Avoid twisting forcefully, which could damage the valve stem.
- Check the valve stem: With the knob removed, inspect the valve stem for damage or debris. A clean stem helps the new knob seat properly.
Installing the Chrome/Black Burner Knob
Align the new knob with the valve stem and push it on until it seats. If your griddle uses a set screw, tighten it gently—over-tightening can crack the knob. Once installed, turn the knob to confirm it moves smoothly and returns to the off position. The Chrome/Black Burner Knob is a direct replacement for compatible models, so no adapters are needed.
Fixing a griddle knob that won't turn
If the knob is installed but still won't turn, the issue may be the valve, not the knob. Try these checks before assuming the knob is faulty.
- Remove and re-seat the knob: A knob that is not fully pushed onto the stem may slip or feel stuck. Pull it off and push it back on firmly.
- Check for obstructions: Look for grease buildup or debris around the valve stem. Clean it gently with a cloth.
- Test the valve stem: With the knob off, turn the valve stem with pliers (gently) to see if it moves freely. If it doesn't, the valve may need service—consult your griddle's documentation.
What the supplied information doesn't cover
The Chrome/Black Burner Knob listing confirms fit for most valve stems but does not include a model-specific compatibility chart, torque specifications, or detailed removal instructions for every griddle. If your griddle is an E-Series or uses a 28" or 17" air fryer control knob, this knob is not compatible. For those models, check your owner's manual or contact support for the correct part.

